Linksys WPS54G Manual De Usuario
Setup
9
selected above. The possible options are:
•
WEP - If selected, you must enter the WEP data shown
below. This WEP data must match the Access Point or other
Wireless stations.
below. This WEP data must match the Access Point or other
Wireless stations.
•
AES, TKIP - These options are available with WPA and
WPA-PSK. Select the correct option.
WPA-PSK. Select the correct option.
WPA Preshared Key
This is for WPA-PSK only.
If using WPA-PSK Enter the PSK (Pre-shared Key), sometimes
called the network key. All Wireless stations must use the same
key.
called the network key. All Wireless stations must use the same
key.
WEP Key
This section is grayed out unless using WEP.
•
Key # - You can enter up to 4 keys.
Use the radio button to select the Default key (used for
transmissions.) You must enter the default key; the other
keys are optional.
Use the radio button to select the Default key (used for
transmissions.) You must enter the default key; the other
keys are optional.
•
Hex/ASCII - Select the method of entering the key value.
(Note: Hex chars are 0~9 and A~F.)
(Note: Hex chars are 0~9 and A~F.)
•
Enter the key value or values you wish to use. These must
match the Access Point or other wireless stations. The De-
fault Key is required, the others are optional.
match the Access Point or other wireless stations. The De-
fault Key is required, the others are optional.