Aruba Networks AP85FXLX Manual De Usuario
Aruba AP-85 Outdoor Access Point Series | Installation Guide
AP-85 Series Installation |
31
Fiber Optic Cable
To use the fiber optic termination kit that is shipped with the AP-85FX/LX models, follow the instructions in the included
Tyco document Instruction Sheet 408-10079.
Tyco document Instruction Sheet 408-10079.
Aruba provides a multi-language document containing country specific restrictions and additional safety and regulatory
information for all Aruba hardware products. This document can be viewed or downloaded from the following location:
information for all Aruba hardware products. This document can be viewed or downloaded from the following location:
www.arubanetworks.com/safety_addendum
.
This product complies with 21 CFR Chapter 1, Subchapter J, Part 1040.10, and IEC 60825-1: 1993, A1: 1997, A2: 2001, IEC
60825-2: 2000.
60825-2: 2000.
For continued compliance with the above laser safety standards, only approved Class 1 modules from our approved vendors
should be installed in Aruba products.
should be installed in Aruba products.
Lightning Arrestor Installation
Refer to the instructions that are shipped with the Aruba lightning arrestor (AP-LAR-1).
Antenna Installation
Refer to the instructions that are shipped with your Aruba outdoor rated antenna.
AC Power Cable: United States (US)
Black
Line
White
Neutral
Green
Ground
AC Power Cable: Europe (EU)
Brown
Line
Blue
Neutral
Green/Yellow
Ground
N O T E
Fiber optic cables are not included and must be purchased separately. Purchase a suitable UV-
resistant, outdoor rated, multi-mode fiber optic cable for use with the AP-85FX and a single-mode
fiber optic cable for use with the AP-85LX.
!
CAUTION
Use of controls or adjustments of performance or procedures other than those specified in this
manual may result in hazardous radiation exposure.
Table 5 AC and DC Power Cable Descriptions
Cable Type
Wire Color
Assignment
CLASS 1
LASER PRODUCT