Hewlett Packard Enterprise Company APIN0204205 Manual De Usuario

Installation Guide

www.arubanetworks.com

1344 Crossman Avenue

Sunnyvale, California 94089

Phone: 408.227.4500
Fax 408.227.4550

AP-200 Series Wireless Access Point | Installation Guide
Part Number 0511556-01 | February 2014

Main Site

Support Site

Software Licensing Site

Wireless Security Incident
Response Team (WSIRT)

Americas and APAC Support Email 

EMEA Support Email

emea.support@arubanetworks.com

WSIRT Email
Please email details of any security
problem found in an Aruba product.

Aruba Corporate

+1 (408) 227-4500

FAX

+1 (408) 227-4550

Support

United States

Universal Free Phone Service Number (UIFN): Australia, Canada, 
China, France, Germany, Hong Kong, Ireland, Israel, Japan, Korea, 
Singapore, South Africa, Taiwan, and the UK

All Other Countries

800-WI-FI-LAN (800-943-4526)

+800-4WIFI-LAN (+800-49434-526)

+1 (408) 754-1200

© 2014 Aruba Networks, Inc.  AirWave

®

, Aruba Networks

®

, Aruba Mobility Management System

®

, Bluescanner, 

For Wireless That Works

®

, Mobile Edge Architecture, People Move. Networks Must Follow., RFProtect

®

, The All 

Wireless Workplace Is Now Open For Business, and The Mobile Edge Company

®

 are trademarks of Aruba 

Networks, Inc. All rights reserved. All other trademarks are the property of their respective owners.

Certain Aruba products include Open Source software code developed by third parties, including software code 
subject to the GNU General Public License ("GPL"), GNU Lesser General Public License ("LGPL"), or other Open 
Source Licenses. The Open Source code used can be found at this site:

http://www.arubanetworks.com/open_source

The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate 
other vendors' VPN client devices constitutes complete acceptance of liability by that individual or corporation for 
this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against 
it with respect to infringement of copyright on behalf of those vendors.

This hardware product is protected by an Aruba warranty. For details, see Aruba Networks standard warranty 
terms and conditions.

Figure 6  Attaching the Ceiling Rail Adapter

4. If necessary, connect the console cable to the console port on the back of the 

AP.

5. Hold the AP next to the ceiling tile rail with the ceiling tile rail mounting slots 

at approximately a 30-degree angle to the ceiling tile rail (see 

sure that any cable slack is above the ceiling tile.

6. Pushing toward the ceiling tile, rotate the AP clockwise until the device clicks 

into place on the ceiling tile rail.

Figure 7  Mounting the AP

7. On the AP-204, install the external antennas according to the manufacturer’s 

instructions, and connect the antennas to the antenna interfaces on the AP.

Install cables in accordance with all applicable local and national regulations and 
practices.

The integrated LEDs on the AP can be used to verify that the AP is receiving 
power and initializing successfully (see 

). Refer to the 

Start Guide for further details on verifying post-installation network 
connectivity.

Provisioning parameters are unique to each AP. These local AP parameters are 
initially configured on the controller which are then pushed out to the AP and 
stored on the AP itself. Aruba recommends that provisioning settings be 
configured via the ArubaOS Web UI only. Refer to the 

ArubaOS User Guide for 

complete details.

Configuration parameters are network or controller specific and are configured 
and stored on the controller. Network configuration settings are pushed out to 
the AP(s) but remain stored on the controller.

Configuration settings can be configured via the ArubaOS Web UI or ArubaOS 
CLI. Refer to their respective guides for further details: the 

ArubaOS User Guide.



Ethernet:



1x 10/100/1000 auto-sensing Ethernet RJ-45 Interface



MDI/MDX



IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)



Power over Ethernet (IEEE 802.3at and 802.3af compliant), 48V DC (nominal) and 56V DC 
(maximum)/350mA (see 



Power:



12 VDC power interface, supports powering through an AC-to-DC power adapter



POE support on Ethernet port: 802.3at-compliant and 802.3af-compliant POE sourcing 
devices

For additional specifications on this product, please refer to the data sheet. The data sheet can be 
found at 

www.arubanetworks.com

.

For the most current information about Global Environmental Compliance and Aruba products, see 
our website at 

www.arubanetworks.com

.

Aruba products at end of life are subject to separate collection and treatment 
in the EU Member States, Norway, and Switzerland and therefore are marked 
with the symbol shown at the left (crossed-out wheelie bin). The treatment 
applied at end of life of these products in these countries shall comply with 
the applicable national laws of countries implementing Directive 2002/96EC 
on Waste of Electrical and Electronic Equipment (WEEE).

Aruba products also comply with the EU Restriction of Hazardous 
Substances Directive 2011/65/EC (RoHS). EU RoHS restricts the use of 
specific hazardous materials in the manufacture of electrical and 
electronic equipment. Specifically, restricted materials under the RoHS 

Directive are Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury, 
Hexavalent Chromium, and Bromine. Some Aruba products are subject to the exemptions listed in 
RoHS Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and packaging 
will be marked with the “RoHS” label shown at the left indicating conformance to this Directive.

Aruba products also comply with China environmental declaration requirements 
and are labeled with the “EFUP 10” label shown at the left.

Aruba Networks provides a multi-language document that contains country-specific restrictions and 
additional safety and regulatory information for all Aruba access points. This document can be 
viewed or downloaded from the following location: 

www.arubanetworks.com/safety_addendum 

The following regulatory model names apply to the AP-200 Series:



AP-204: APIN0204



AP-205: APIN0205

This device is electronically labeled. To view the FCC ID:

1.

Log into the controller WebUI.

2.

Navigate to 

Maintenance > Controller > About.  

This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. 
Operation is subject to the following two conditions:

1.

This device may not cause harmful interference.

2.

This device must accept any interference received, including interference that may cause 
undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause 
interference harmful to radio communications.

If this equipment does cause interference, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or more of the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment to an outlet on a circuit different from that to which the receiver is 
connected.



Consult the dealer or an experienced radio or TV technician for help.

Complies with the Class B limits for radio noise emissions as set out in the interference-causing 
equipment standard entitled “Digital Apparatus,” ICES-003 of Industry Canada.

Cet apareil numerique de la classe B respecte toutes les exigencies du Reglement sur le materiel 
brouilleur du Canada.

Users are advised that high power Radars are allocated as primary users of the bands 5250-5350 MHz 
and 5650-5850 MHz and these Radars could cause interference and/or damage to Licensed Exempt 
WLAN devices.

This product is CE marked according to the provisions of the R & TTE Directive 

(1999/5/EC) - CE(!). Aruba Networks Inc., hereby declares that the APIN0204 / APIN0205 device 
models are in compliance with the essential requirements and other relevant provisions of Directive 
1999/5/EC -CE(!)

The Declaration of Conformity made under Directive 1999/5/EC is available for viewing at the 
following location: 

(i)les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une 
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de 
satellites mobiles utilisant les mêmes canaux;

(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-
5 725 MHz doit se conformer à la limite de p.i.r.e.; 

(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se 
conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le 
cas. 

De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance 

sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 

5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs 

LAN-EL.

 

1.

Equipment not suitable for use in the presence of flammable mixtures.

2.

End product system, including power supply, must be evaluated to IEC 60601-1-1 and IEC 60601-
1 by the end user.

3.

Wipe with a dry cloth, no additional maintenance required.

4.

No serviceable parts, the unit must be sent back to the manufacturer for repair.

5.

No modifications are allowed without Aruba approval. 

If a power adapter other than the one provided by Aruba Networks is used 
in the US or Canada, it should be cULus (NRTL) Listed, with an output 
rated 12 VDC, minimum 1.5A, marked “LPS” or “Class 2,” and suitable for 
plugging into a standard power receptacle in the US and Canada.

RF Radiation Exposure Statement: This equipment complies with FCC 
RF radiation exposure limits. This equipment should be installed and 
operated with a minimum distance of 7.9 inches (20 cm) between the 
radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter 
must not be co-located or operating in conjunction with any other antenna 
or transmitter. When operated in the 5.15 to 5.25 GHz frequency range, this 
device is restricted to indoor use to reduce the potential for harmful 
interference with co-channel Mobile Satellite Systems.

Changes or modifications to this unit not expressly approved by the party 
responsible for compliance could void the user’s authority to operate this 
equipment.

10

᳝↦᳝ᆇ⠽䋼ໄᯢ

᳝↦᳝ᆇ⠽䋼៪ܗ㋴(Hazardous Substance) 

䚼ӊৡ⿄

(Parts) 

䪙

3E

∲

+J

䬝

&G

݁Ӌ䫀

&U

໮⒈㘨㣃

3%%

໮⒈Ѡ㣃䝮

3%'(

⬉䏃ᵓ

(

PCA Boards)

h

ƻ

ƻ

ƻ

ƻ

ƻ

ᴎẄ㒘ӊ

(

Mechanical Sub-Assemblies)

h

ƻ

ƻ

ƻ

ƻ

ƻ

ƻ˖ 㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ SJ/T11363-2006 ᷛޚ㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ

Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is 
below the relevant threshold of the SJ/T11363-2006 standard.

h˖ 㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ6-7ᷛޚ㾘ᅮⱘ䰤䞣㽕∖DŽ

Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials 
in the parts is above the relevant threshold of the SJ/T11363-2006 standard. 

ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼DŽ

ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ
՟བ⬉∴ऩܗ῵ഫ䌈೼݊ѻકϞ
ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟ݠЁ᠔㾘ᅮⱘᴵӊϟᎹ԰
The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are 
per the symbol shown here. The Environment- Friendly Use Period is valid only when the 
product is operated under the conditions defined in the product manual. 

Aucune émission n’est permise dans la bande 5 600-5 650 MHz. Jusqu’à 
nouvel avis, les dispositifs visés par la présente annexe ne doivent pas être 
en mesure d’émettre dans la bande 5 600-5 650 MHz, afin de protéger les 
radars météorologiques d’Environnement Canada exploités dans cette 
bande. 

RF Déclaration sur la radioexposition: Cet équipement est conforme aux 
normes IC Limites d'exposition aux rayonnements RF. Cet équipement doit 
être installé et utilisé à une distance minimum de 7,9 pouces (20 cm) entre 
l'radiateur et votre corps pour 2,4 GHz et 5 GHz opérations. cet émetteur ne 
doit pas être co-localisées ou opérant en conjonction avec une autre 
antenne ou émetteur.