Hewlett Packard Enterprise Company ARUBA70 Manual De Usuario
Provisioning Access Points
17
Chapter 2
Connecting the Console Terminal
Manual provisioning requires this procedure. You must use the serial console breakout adapter
cable to be able to access the serial console interface to the AP 70 while allowing the device to
be powered by the AC adapter or POE (from an Aruba WLAN switch).
cable to be able to access the serial console interface to the AP 70 while allowing the device to
be powered by the AC adapter or POE (from an Aruba WLAN switch).
F
IGURE
2-3 Aruba 70 Console Topologies
Note The LAN connections are optional unless POE is used to power the AP.
Console Access to the AP
F
IGURE
2-4 Connecting Directly to the AP
1
Connect the adapter’s “To AP” RJ-45 connector to the Aruba 70 FE Port.
2
Connect the adapter’s DB-9 connector to the serial port on the console terminal.
3
Connect the adapter’s “To Network” RJ-45 connector to the LAN.
The LAN connection is optional unless POE is being used to power the AP. For
convenience, the adapter kit includes an FE coupler to connect RJ-45 cable ends together.
convenience, the adapter kit includes an FE coupler to connect RJ-45 cable ends together.
LAN
Console Connection
via networking closet
Console Connection
via direct access to AP
Deployed
Location
Console
Terminal
Serial
Breakout
Serial
Breaout
Console
Terminal
Aruba AP
Aruba AP
DB-9 Connector
to Console Terminal
"To AP" Connector
to AP FE Port
"To Network" Connector
to FE Coupler
to LAN FE Cable
1
2
3
To LAN