Hewlett Packard Enterprise Company WAP3212-001 Manual De Usuario

LHT Innovation HAM TX

Page 7

Lufthansa Technik AG Proprietary Information. Use or disclosure subject to restrictive legend on title page.

LHT Form (HAM TX) Printed in the Federal Republic of Germany

The WAP has four designated discrete inputs used as strapping pins to specify its position in the aircraft. The
WAP applies the configuration parameters according to this strapping status.
It is recommended for testing to use configuration A (see table 1) for a single WAP or A, B, C, and so forth for
multiple WAPs. Full DHCP configration is limited until software version SWWAP-001-012.

<IPADDR_A>192.168.10.11</IPADDR_A>
<NETWORK_A>192.168.10.255</NETWORK_A>
<NETMASK_A>255.255.255.0</NETMASK_A>
<GATEWAY_A>192.168.10.1</GATEWAY_A>
<ARUBA_PHYSICAL_IPADDR_A>192.168.10.31</ARUBA_PHYSICAL_IPADDR_A>
<ARUBA_PHYSICAL_NETWORK_A>192.168.10.255</ARUBA_PHYSICAL_NETWORK_A>
<ARUBA_PHYSICAL_NETMASK_A>255.255.255.0</ARUBA_PHYSICAL_NETMASK_A>
<ARUBA_PHYSICAL_GATEWAY_A>192.168.10.1</ARUBA_PHYSICAL_GATEWAY_A>
<ACHANNEL_A>44</ACHANNEL_A>
<ATXPOWER_A>3</ATXPOWER_A>
<GCHANNEL_A>11</GCHANNEL_A>
<GTXPOWER_A>3</GTXPOWER_A>

The WAP will start the controller board as soon as the WAP is powered and the power discrete is connected
to ground. During booting the WAPs status LED is blue after booting is finished the status LED turns green.