SendFar Technology Co. Ltd. OAB-04004 Manual De Usuario
Version 1.01
18
2.4.8 Back-up the SF-3000’s Configuration Files
After configuring SF-3000, user can back-up the configuration files. User
can upload the latest back-up files and recover the SF-3000 configuration
to the settings specified in the back-up files.
can upload the latest back-up files and recover the SF-3000 configuration
to the settings specified in the back-up files.
Downloading Configuration Files
Just being the same with firmware upgrade procedures. After the prompt
character NetARM> is displayed, select “S – Save image to file”, and then
select “6: CONFIG” to back-up the SF-3000 configuration as the figure
shown below. The back-up file will be saved as <CONFIG.IMG> file.
character NetARM> is displayed, select “S – Save image to file”, and then
select “6: CONFIG” to back-up the SF-3000 configuration as the figure
shown below. The back-up file will be saved as <CONFIG.IMG> file.
Uploading Configuration Files
To upload an configuration file to SF-3000, user should select “F --
upgrade Flash memory” and then select “6: CONFIG”. While the window
starts to display “C” character continuously, click Transfer and select the
preferred <CONFIG.IMG>, then press OK to start transferring file to SF-
3000.
upgrade Flash memory” and then select “6: CONFIG”. While the window
starts to display “C” character continuously, click Transfer and select the
preferred <CONFIG.IMG>, then press OK to start transferring file to SF-
3000.
Version 1.01
19
Note: Remember to press “R” to reboot the system after you upload the
configuration file to the SF-3000.