SendFar Technology Co. Ltd. OAP-04003 Manual De Usuario
8
2.1
Configuration Examples
2.1.1 Wireless Access Bridge
1. Set the Outdoor AP as a bridge (bridge IP address is 192.168.2.1).
2. Set Wireless parameters on Outdoor AP: Channel (1) and SSID
(wireless)
3. Set Wireless parameters on client stations PC1, PC2 and PC3:
SSID (wireless).
4. Left side stations are transparent to the right side network.
5. DHCP server assigns IP address to PC1, PC2 and PC3.
9
2.1.2 Wireless Access Router with PPPoE Ethernet
connection
connection
1. Set the Outdoor AP as a Router (Wireless Interface IP is
192.168.1.1, Ethernet Interface IP is 192.168.2.1, must turn on NAT on
Ethernet Interface and turn off NAT on Wireless interface, default route
is 0.0.0.0).
Ethernet Interface and turn off NAT on Wireless interface, default route
is 0.0.0.0).
2. Turn on PPPoE Interface (Interface NO.3) and specify that your
personal ISP provided PPPoE Username and PPPoE Password to
enable ADSL broadband access.
enable ADSL broadband access.
3. Set Wireless parameters on Outdoor AP: Channel (1) and SSID
(wireless)
4. Turn on DHCP server on the Outdoor AP and assign IP address to
PC1, PC2 and PC3.
5. Set Wireless parameters on client stations PC1, PC2 and PC3:
SSID (wireless).