Controlled Electronic Management Systems Ltd ETHERPROX Manual De Usuario

When you connect power to the EtherProx Entry reader for the first time, EtherProx uses 
the default configuration settings. However, you can configure the reader for your site 
requirements. You must complete the following tasks before you can use the reader: 

·  Set up an IP address 

·  Test the connection 

·  Set the time and date 

·  Enter a location name; change the user name and password 

·  Set up the initial door configuration 

·  Add Cardholders 

To access EtherProx Entry through a network connection, assign a unique IP 
address to the device. Check with your local network administrator to coordinate 
the IP address and prevent network-addressing conflicts. 

After you determine the IP address, you will need to set up the IP address for 
EtherProx Entry.