Cardionet 1005 Manual De Usuario

Descargar
Página de 72
2
.  Set Up
12     Setting Up
CHECKING BATTERY POWER
When your monitor is in the base, touch the battery
symbol on the screen and the unit will tell you if the
battery is fully charged.  If the battery is not fully charged,
leave the monitor in the base for a full recharge, which
takes four hours.
STAYING IN RANGE
The monitor’s rechargeable battery provides up to 18
hours of use for each four hours of recharging.  When you
are at home, leave the monitor in the base, unless you go
to a part of the house where the sensor and monitor
would be out of communications range.  Whenever you
begin to go out of communications range, the sensor will
beep to alert you – reminding you either return within
range or take your monitor with you.
LIMITATIONS OF CELL PHONE COVERAGE
When your CardioNet monitor is in the base station, it
uses the regular telephone system for communications
with the CardioNet center.  When you are away from
home – or whenever your CardioNet monitor is out of the
base station – the monitor uses cell phone technology to
contact the CardioNet center and transmit ECG data.
As with consumer cell phones, calls can sometimes be
delayed or blocked by coverage problems, heavy traffic
on cell phone networks, or physical obstructions such as
buildings or mountains.
See Page 20 for
more details about
checking battery
power.
At home, leave the
monitor in the base
whenever possible.