AirVast Technology Inc. WN360G Manual De Usuario
17
By default, Key 1 will be used.
Create Keys with Passphrase
Choose this command when the associated wireless network uses a passphrase to create WEP
keys. Enter the passphrase string in the Passphrase filed to generate four encryption keys in the
Key fields above. Note that only letters A-F are valid for the Passphrase feature.
After finish configuring the Encryption features, remember to click the Apply button to initiate the
new settings.
The IBSS Tab
If you, as a creator of the wireless network, are communicating with other stations via the IBSS
(802.11 Ad-hoc) mode to form peer-to-peer networks, click the IBSS (Independent Basic Service
Set) tab to specify an operating radio frequency channel from the pull-down list under the IBSS
Channel Selection section.
Note: Choosing the IBSS Channel command from the right-click menu of PRISM Configuration Utility
tray icon will launch this tab too.
Note that the available channels differ from country to country, and the channel number must be the
same between the entries/stations within the range, so that each can communicate with each other.
Or you may simply click Defaults to automatically determine the channel number for you. When
done, click Apply to activate the new configuration.
On the other hand, while in the Access Point mode, you will find the channel number is the same
as the associated access point. Thus, there’s no need to manually set the value.
Figure 3-7: The IBSS Tab