ComLink Products L.L.C. CL-001 Manual De Usuario
ComLink Transmitter
Transmitter Batteries
The ComLink Transmitter requires two "button" cells: Type 76 (Silver
Oxide) or Type 357 (Silver Oxide) may be used.
The ComLink Transmitter requires two "button" cells: Type 76 (Silver
Oxide) or Type 357 (Silver Oxide) may be used.
Insert each battery into the Battery Tray as shown in the figure 2.
Insert the Battery Drawer into the ComLink Transmitter.
Connector Cable
Plug the Transmitter Connector Cable into the "Audio Port" or
"Headset Jack" of your CellPhone.
"Headset Jack" of your CellPhone.
Position the Transmitter on the back of your cellphone to determine
the best location for the assembled Transmitter and Cable.
the best location for the assembled Transmitter and Cable.
Double-Stick Tape Placement
Once you have determined the best Transmitter and Connector
Cable location for your particular CellPhone, secure the Transmitter
to the Back of the Cellphone with the supplied Double Stick Tape.
Cable location for your particular CellPhone, secure the Transmitter
to the Back of the Cellphone with the supplied Double Stick Tape.
Operation and Battery Life
The ComLink Transmitter will turn on automatically when you make
a call on your Cellphone.
a call on your Cellphone.
A few seconds after your Cellphone call ends, the ComLink
Transmitter will enter "Standby Mode" in order to conserve battery
life.
Transmitter will enter "Standby Mode" in order to conserve battery
life.