Microsoft Corporation RM-84 Manual De Usuario

error message that the recipient cannot accept the 
invitation.

A person-to-person connection is also known as a Session 
Initiation Protocol (SIP) connection. The SIP profile 
settings must be configured in your device before you can 
use 

. Setting up a SIP profile allows you to 

establish a live person-to-person connection to another 
compatible device. The SIP profile must also be 
established to receive a sharing session.

Ask your network operator or service provider for the SIP 
profile settings, and save them in your device. Your 
network operator or service provider may send you the 
settings over the air or give you a list of the needed 
parameters.

If you know a recipient’s SIP address, you can enter it on 
your contact card for that person. Open 

 from 

your device main menu, and open the contact card (or 
start a new card for that person). Select 

 > 

 > 

. Enter the SIP address in the format 

sip:username@domainname (you can use an IP address 
instead of a domain name). 

To receive a sharing session, the recipient must install 

 and configure the required settings on their 

mobile device. You and the recipient must both be 
registered to the service before you can start sharing. 

1 Select 

 > 

 > 

 or 

.

If you selected 

, a list of video clips opens. Select a 

video clip you want to share and 

 > 

.

2 Select the SIP address of the recipient to which you 

want to send the invitation from the contacts list.
If the SIP address of the recipient is not available, enter 
a SIP address. 

3 Sharing begins automatically when the recipient 

accepts the invitation.

4 Select 

 to pause the sharing session. Select 

 to resume sharing. If sharing a video clip, you 

can rewind and fast forward the clip.

5 To end video sharing, select 

 or close the camera 

slider. Video sharing also ends if the active voice call 
ends.

When someone sends you a share invitation, an invitation 
message is displayed showing the sender’s name or SIP