Microsoft Corporation RM-84 Manual De Usuario

• The flash indicator (4) 

shows if the flash is set to 

 

(

), 

 

(

),  or 

 

(

).

• The resolution indicator 

(5) shows the selected 
image quality. See ‘Adjust 
still image camera 
settings’, p. 36.

• The sequence mode 

indicator (6) shows that 
the sequence mode is 
active. See ‘Take pictures in a sequence’, p. 35.

• The self-timer indicator (7) shows that the

self-timer is activated. See ‘You in the picture—self-
timer’, p. 36.

Saving the captured image may take longer if you change 
the zoom, lighting, or color settings.

When taking a picture, note the following:

• It is recommended to use both hands to keep the 

camera still.

• To take images or record video in different 

environments, use the correct mode for each 
environment. See ‘Shooting modes’, p. 37.

• The quality of a zoomed picture is lower than that of a 

non-zoomed picture.

• The camera goes into the battery saving mode if there 

are no key presses within a minute. To continue taking 
pictures, press 

.

After the image is taken, note the following: 

• If you do not want to keep the image, press 

.

• To send the image, press 

, and select 

, 

, or 

. For more 

information, see ‘Messaging’, p. 51 and ‘Bluetooth 
connectivity’, p. 84. This option is not available during 
an active call.

• To send an image to the other party during an active 

call, select 

 > 

.

• To edit the picture, select 

 > 

. See ‘Edit 

images’, p. 38.

• To print the picture, select 

 > 

. See ‘Image 

print’, p. 46.

To set the camera to take pictures in a sequence with a 
single press of the 

 key or the camera shutter key, 

select 

 > 

. If you press and hold 

the 

 key or the camera shutter key, image capture 

continues until you release the key. You can capture up to 
100 images, depending on the available memory.

You can also use the sequence mode with the 

. See ‘You in the picture—self-timer’, p. 36. If the