Billion Electric Co. Ltd. BIL-5200GR4 Manual De Usuario

Choices vary depending on what you select in the Mode field. 

Dynamic IP: Select this option if your ISP provides you an IP address automatically. This 

option is typically used for Cable services. Please enter the Dynamic IP information 

accordingly. 

Static IP: Select this option to set static IP information. You will need to enter in the 

Connection type, IP address, subnet mask, and gateway address, provided to you by your 

ISP. Each IP address entered in the fields must be in the appropriate IP form, which is four IP 

octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this 

format. 

PPPoE/PPPoA: Select this option if your ISP requires you to use a PPPoE connection. This 

option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address 

automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for 

your PPPoE connection. Please enter the information accordingly. 

 

Select this option if your ISP requires you to use a PPPoE connection. This option is typically 

used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for 

your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE 

connection. Please enter the information accordingly. 

 User Name: Enter the user name exactly as your ISP assigned.  

 Password: Enter the password associated with the user name above. 

 Encapsulation: select Bridge in the Mode field, select either PPPoA or RFC 1483. 

select Routing in the Mode field, select PPPoA, RFC 1483, ENET ENCAP or PPPoE. 

Multiplex: Select the method of multiplexing used by your ISP. Choices are VC or LLC. 

 Half Bridge: The Half Bridge mode can only be used when a single IP address has been 

assigned by the ISP. It is used when the use of NAT is not desired and there is a single 

computer attached to the router. 

 Connection: The schedule rule(s) have priority over your Connection settings. 

Always on: Select Always on Connection when you want your connection up all the time. 

Connect on Demand: Select Connect on Demand when you don't want the connection up 

all the time and specify an idle time-out in the Max Idle Timeout field 

 TCP MSS Option: Enter the TCP Maximum Segment Size (MSS) 

 Get IP Address: Choose Static or Dynamic 

 Static IP Address: Enter the IP address of ADSL Router in dotted decimal notation, for 

example, 192.168.1.254 (factory default). 

 IP  Subnet  Mask: The default is 0.0.0.0. User can change it to other such as 

255.255.255.0.Type the subnet mask assigned to you by your ISP (if given). 

 Gateway: You must specify a gateway IP address (supplied by your ISP) when you use 

 

34