Billion Electric Co. Ltd. BIL-7401VGPR4 Manual De Usuario

68

Inbound: Internet to LAN 
Outbound: LAN to Internet 
YES: Allowed
NO: Blocked
N/A: Not Applicable

Rule Name Helper: Users-define description to identify this entry or click “Select” drop-down 
menu to select existing predefined rules. The maximum name length is 32 characters.

Time Schedule: It is self-defined time period.  You may specify a time schedule for your
prioritization policy. For setup and detail, refer to Time Schedule section

Source IP Address(es) / Destination IP Address(es): This is the Address-Filter used to allow or 
block traffic to/from particular IP address(es).  Selecting the Subnet Mask of the IP address range 
you wish to allow/block the traffic to or form; set IP address and Subnet Mask to 0.0.0.0 to inactive 
the Address-Filter rule.

Tip: To block access, to/from a single IP address, enter that IP address as the Host IP Address 
and use a Host Subnet Mask of “255.255.255.255”.

Type: It is the packet protocol type used by the application, select TCP, UDP or both TCP/UDP.

Protocol Number: Insert the port number.

Source Port: This Port or Port Ranges defines the port allowed to be used by the Remote/WAN to 
connect to the application. Default is set from range 0 ~ 65535. It is recommended that this option 
be configured by an advanced user.

Destination Port: This is the Port or Port Ranges that defines the application.

Inbound / Outbound: Select Allow or Block the access to the Internet (“Outbound”) or from the
Internet (“Inbound”).

Click Add button to apply your changes.