PNI Corporation IFS-12418 Manual De Usuario
SERVICE AND REPAIR
If you wish to return your STEEL EYE radar detector
directly to PNI Corporation, contact us between 8:00 a.m.
and 5:00 p.m. (PST) Monday through Friday at the
following phone numbers or email address. We’ll give
you instructions for returning your STEEL EYE for repair
or replacement.
directly to PNI Corporation, contact us between 8:00 a.m.
and 5:00 p.m. (PST) Monday through Friday at the
following phone numbers or email address. We’ll give
you instructions for returning your STEEL EYE for repair
or replacement.
Phone:
(707) 566-2260
Fax:
(707) 566-2261
Email:
returns@pnicorp.com
ó
Never use AA rechargeable batteries as they tend to
have a shorter battery life.
ó
Do not mix old and new batteries.
ó
TURN OFF the radar detector whenever you leave your
vehicle. Even a weak radar signal can cause the radar
detector to remain on and drain your batteries.
detector to remain on and drain your batteries.
Auto Shut-off
(operates with battery power only)
The STEEL EYE will conserve battery power by
The STEEL EYE will conserve battery power by
automatically shutting off after 1 hour if no signal or
activity is detected.
ó
activity is detected.
ó
The screen will count down from 9 to 0 during
automatic shut-off, accompanied by a beep sound.
➢
Press any button during the countdown to keep
the radar detector on.
11. HOW THE STEEL EYE RADAR DETECTOR WORKS.
When the STEEL EYE detects a police signal, the screen
displays the band that the police gun is using — “X”, “K”, or
“Ka” — along with a number indicating the strength of the
detected signal (called the Signal Strength Meter).
displays the band that the police gun is using — “X”, “K”, or
“Ka” — along with a number indicating the strength of the
detected signal (called the Signal Strength Meter).
ó
There are 9 levels in the Signal Strength Meter — from
1 to 9.
ó
The higher the number, the stronger the signal.
ó
Usually, stronger signals (5-9) are closer
to you than weaker signals (1-4).
ó
“L” is displayed in the number field when
a laser signal is detected.
ó
ó
Both “Ka” and “P” are displayed on the screen when a
POP signal is detected.
➢
Promptly SLOW DOWN if you’re driving over the speed
limit!
12. SIGNAL ALERT TEST
The STEEL EYE includes a test mode for testing and
familiarizing yourself with the STEEL EYE visual displays
and audio alarms.
➢
Press and hold the POP and FILTER buttons
simultaneously for 5 seconds.
ó
The screen will display each of the radar bands
(X, K, Ka), along with each of the numbers in the
Signal Strength Meter (1-9). Each message will
be accompanied by a unique audio alarm.
Signal Strength Meter (1-9). Each message will
be accompanied by a unique audio alarm.
ó
The screen will then display the POP alert (Ka-P),
accompanied by a unique audio alarm.
ó
The screen will display the laser signal alert (L),
accompanied by a unique audio alarm.
ó
When the test is finished, the screen will illuminate
all of the screen icons for 5 seconds, and then revert
to stand-by display mode (with only the POWER
and FILTER icons lit until the unit begins to retrieve
radar signals).
to stand-by display mode (with only the POWER
and FILTER icons lit until the unit begins to retrieve
radar signals).
TROUBLESHOOTING
Your STEEL EYE radar detector is designed to provide
consistent and reliable service. If you experience any
problems, please refer to this section for assistance.
consistent and reliable service. If you experience any
problems, please refer to this section for assistance.
1. My STEEL EYE radar detector does not power up
when it’s operating on battery power.
➢
Check the batteries and replace them if necessary.
2. My STEEL EYE does not power up when it’s operating
by power cord.
➢
Check all power cord connections.
➢
Check the fuse in the 12-volt power cord adapter and
replace it if necessary.
replace it if necessary.
ó
Fuse Replacement: The 12-volt power cord
adapter has a replaceable 2-Amp SAG fuse located
below the silver tip. To check or replace the fuse:
adapter has a replaceable 2-Amp SAG fuse located
below the silver tip. To check or replace the fuse:
➢
Slowly and carefully unscrew the tip of the plug,
making sure the spring and silver tip located
inside the plug do not fly out when you remove
the cap.
making sure the spring and silver tip located
inside the plug do not fly out when you remove
the cap.
➢
Check the fuse and replace it if necessary.
➢
Check the power outlet in your vehicle and clean if it
is dirty.
is dirty.
➢
Check your vehicle’s fuse panel to see if the fuse for
the power socket is burned out.
the power socket is burned out.
3. The STEEL EYE did not alert when passing an officer.
➢
Check your batteries and power cord connections to
make sure your radar detector is receiving power.
make sure your radar detector is receiving power.
ó
Note that not all police officers are equipped with a
radar/laser device, or their device may not have
been in use at that time.
radar/laser device, or their device may not have
been in use at that time.
4. The STEEL EYE shows erratic or frequent false alerts.
➢
Use the FILTER-ON mode if you are not currently
doing so.
doing so.
5. The STEEL EYE does not alert early enough.
➢
Make sure the radar detector is level to the road.
➢
Make sure the radar window and the top laser
receiver are not obstructed. Move the radar detector
receiver are not obstructed. Move the radar detector
if necessary.
6. The display screen looks unclear or fuzzy.
➢
Be sure the protective overlay has been removed from
the screen.
the screen.
LIMITED WARRANTY
SHORT SUMMARY OF LIMITED WARRANTY FOR
THE STEEL EYE™ RW3000
For the Full Warranty and Limitation of Liability applicable to this
product, see our Website at www.pnicorp.com, select “Consumer
Products” and click “Download.”
PNI Corporation (”PNI”) manufactures its products from parts
and components that are new or equivalent to new in performance,
and warrants to the original user that this product will be free of
defects in workmanship and materials for one (1) year from the date
of purchase.
and components that are new or equivalent to new in performance,
and warrants to the original user that this product will be free of
defects in workmanship and materials for one (1) year from the date
of purchase.
This warranty does not cover wear and tear due to normal use, or
damage to the product as the result of improper usage, neglect of
care, alteration, accident or unauthorized repair.
damage to the product as the result of improper usage, neglect of
care, alteration, accident or unauthorized repair.
If the product is found by PNI to be defective, PNI will repair or
replace the product and return the product or its replacement to you
at no charge, provided that you ship the product to PNI at your
expense with a description of the defect and subject to the other
conditions of this warranty. Should the product prove to be
irreparable, PNI may substitute an equivalent product of the same or
similar style and of a value not in excess of the original purchase
price of your unit.
replace the product and return the product or its replacement to you
at no charge, provided that you ship the product to PNI at your
expense with a description of the defect and subject to the other
conditions of this warranty. Should the product prove to be
irreparable, PNI may substitute an equivalent product of the same or
similar style and of a value not in excess of the original purchase
price of your unit.
PNI warrants the repaired or replacement product to be free from
defects in material and workmanship on the same terms as the
product originally purchased.
defects in material and workmanship on the same terms as the
product originally purchased.
This warranty will be void if the products, serial number or other
identification marks have been defaced, damaged or removed.
This warranty does not apply to the battery necessary to operate
the product.
identification marks have been defaced, damaged or removed.
This warranty does not apply to the battery necessary to operate
the product.
This warranty is extended to the original retail purchaser only and
may not be transferred or assigned to subsequent owners. In order
to validate your warranty, you must provide proof of purchase
acceptable to PNI together with the product shipped for warranty
repair/replacement.
may not be transferred or assigned to subsequent owners. In order
to validate your warranty, you must provide proof of purchase
acceptable to PNI together with the product shipped for warranty
repair/replacement.
Products returned to PNI must be pre-authorized by PNI with an
RMA (return material authorization) number marked on the outside
of the package. Please refer to the Service and Repair section for PNI
Corporation contact information.
RMA (return material authorization) number marked on the outside
of the package. Please refer to the Service and Repair section for PNI
Corporation contact information.
4. POWER UP.
➢
Press the POWER button to turn the radar detector on
and off.
ó
ó
The POWER icon will be lit on the screen when the
detector is on. If you are using battery power, the
POWER icon and all other icons will blink. If you are
using the 12volt power cord, the POWER icon and all
other icons will be continously lit.
POWER icon and all other icons will blink. If you are
using the 12volt power cord, the POWER icon and all
other icons will be continously lit.
ó
If you are using battery power, the radar detector will
use the Auto Shut-off feature (see MONITORING
YOUR BATTERY POWER) to conserve battery power.
YOUR BATTERY POWER) to conserve battery power.
ó
If you are using the 12V power cord, the radar
detector will automatically turn on and turn off with
your vehicle's ignition system, assuming the ignition
system controls power to the 12 volt. If the ignition
system doesn't control the 12 volt power, you will
need to manually control the detector.
your vehicle's ignition system, assuming the ignition
system controls power to the 12 volt. If the ignition
system doesn't control the 12 volt power, you will
need to manually control the detector.
5. ADJUST SCREEN BRIGHTNESS.
➢
Press and hold the MUTE button for several seconds to
access the DIM mode.
➢
Release the button to select a screen brightness of
‘BRIGHT,’ ‘DIM’ or ‘DARK.’
6. FILTER OUT FALSE ALERTS.
The false-alert filter screens out false alerts often caused
in urban areas by automatic door openers, alarm systems,
and more.
➢
Press the FILTER button to turn the false-alert filter ON.
ó
The (F) icon will light up when the filter is on.
ó
The “On” position filters the X radar band, which in
addition to police radar, is used for other devices such
as automatic door openers, flight towers, alarm
systems, and more.
as automatic door openers, flight towers, alarm
systems, and more.
ó
Ideal for typical city or highway driving.
➢
Press the FILTER button again to turn OFF.
ó
No filtering of alert signals.
ó
Ideal for open space areas, and places where X band
radar devices are still in use.
7. TURN ON POP SIGNAL DETECTOR.
The POP function detects the ultra-fast POP radar gun
mode, which is increasingly being used for speed
mode, which is increasingly being used for speed
monitoring.
➢
Press the POP button to turn the POP function ON.
ó
The “On” position monitors a narrow frequency of the
KA band for POP signals.
ó
When a POP signal is detected, both “Ka” and “P” will
light on the screen and an alarm will sound.
➢
Press the POP button again to turn OFF.
NOTE: The POP function tends to decrease your overall
battery life.
8. ADJUST THE VOLUME.
Use the Signal Alert Test to adjust the volume BEFORE
getting an alert signal. (See the SIGNAL ALERT TEST
section for a full explanation of this feature.)
getting an alert signal. (See the SIGNAL ALERT TEST
section for a full explanation of this feature.)
➢
Press and hold the POP and FILTER buttons simultane-
ously for 5 seconds.
ó
ó
The screen will display each of the radar bands
monitored by the STEEL EYE (X, K and Ka), and will
sound the audio alarm for each signal alert level (1-9)
in the band.
sound the audio alarm for each signal alert level (1-9)
in the band.
➢
Increase or decrease the alert volume level by turning
the VOLUME control clockwise or counter-clockwise.
9. USING THE MUTE FEATURE.
You may want to mute your STEEL EYE for short periods,
such as when you’re having a conversation or trying to hear
a traffic report on the radio.
such as when you’re having a conversation or trying to hear
a traffic report on the radio.
➢
Press the MUTE button to turn it on and off.
ó
When pressed ON, the Mute feature will remain ON
for 1 minute, during which you will not hear any alert
signals.
signals.
ó
The mute feature will automatically turn OFF after 1
minute to ensure you continue to receive alert signals.
10. MONITORING YOUR BATTERY POWER.
The STEEL EYE includes a LOW BATTERY icon on the display
screen.
screen.
ó
The LOW BATTERY icon will light up when approxi-
mately 2 hours of battery life remain.
ó
The icon will flash for 10 seconds, accompanied by
several loud audio warnings.
ó
This will repeat every half-hour until no battery power
remains and the radar detector shuts off.
Prolonging Battery Life
The battery life for the AA alkaline batteries provided in the
package is approximately 30-40 hours, based on average
usage. To prolong AA battery life:
package is approximately 30-40 hours, based on average
usage. To prolong AA battery life:
COMPLETE GUIDE
1. CHOOSE BATTERY OR POWER CORD OPERATION.
BATTERIES — No dangling cords; neater appearance;
blinking display
POWER CORD — No blinking display
1A. Insert the Batteries.
➢
Slide open and remove the battery door on the
back of the STEEL EYE radar detector.
➢
Insert two fresh AA alkaline batteries, with the head
of the batteries (positive poles) facing in.
➢
Slide the battery door closed and shut tight.
NOTE: We suggest keeping your power cord readily
available. If your batteries are drained, the cord will
allow you to continue using your radar detector
until you can replace the batteries.
allow you to continue using your radar detector
until you can replace the batteries.
2. SELECT WINDSHIELD OR DASHBOARD MOUNTING.
WINDSHIELD — ensures the most accurate and consistent
detection of radar signals
detection of radar signals
DASHBOARD — better visibility through the windshield; more
discreet appearance
discreet appearance
2A. Mount on your windshield.
➢
Remove the plastic film from the screen.
➢
Clean a spot on your windshield that will allow
easy viewing of both the STEEL EYE screen
and the road.
and the road.
ó
NOTE: The back of the STEEL EYE, where the radar
receivers are located, should directly face the road
in front of you and not be blocked.
in front of you and not be blocked.
➢
Bend the mounting bracket as needed to ensure
the radar detector will sit level (horizontal) with the
road when mounted.
road when mounted.
➢
Insert the suction cups into the bracket.
➢
Press the suction cups firmly against the windshield
until they take hold.
➢
Attach the radar detector to the bracket. You’ll hear
a click when it’s securely in place.
2B. Mount on your Dashboard.
➢
Remove the plastic film from the screen.
➢
Clean a spot on your dashboard that allows easy
viewing of the STEEL EYE screen.
ó
ó
NOTE: The back of the STEEL EYE, where the
radar receivers are located, should directly face
the road in front of you and not be blocked.
➢
Peel the backing off one side of the two-piece
hook-and-loop fastener and attach the sticky
surface firmly to the bottom of the STEEL EYE
surface firmly to the bottom of the STEEL EYE
radar detector.
➢
Peel the backing from the second side of the
hook-and-loop fastener and press the STEEL EYE
radar detector firmly to the cleaned area on your
dashboard, with the screen facing the rear of
radar detector firmly to the cleaned area on your
dashboard, with the screen facing the rear of
your vehicle.
NOTE: For best results, be sure the radar detector is
level (horizontal) with the road when it is attached
to your dashboard.
NOTE: For best results, be sure the radar detector is
level (horizontal) with the road when it is attached
to your dashboard.
3. USING AN AUDIO EARPIECE.
You can use the STEEL EYE radar detector with an audio
earpiece (for instance, when using the unit on your
motorcycle) by connecting the earpiece to the Auxiliary
Audio jack.
earpiece (for instance, when using the unit on your
motorcycle) by connecting the earpiece to the Auxiliary
Audio jack.
➢
Plug a hands-free earpiece (not included with the STEEL
EYE) into the radar detector’s Auxiliary Audio jack.
ó
ó
You will need an earpiece with a 2.5mm (1/10”) plug.
Remove
Door
WINDSHIELD