Getac Technology Corporation 3X01 Manual De Usuario
Managing Power
3-7
5. Slide the new battery pack all the way into the slot. Make sure to observe
the correct orientation (the ribbon strip must face outward for future battery pack
removal).
removal).
6. Close the compartment cover and slide the release latch downward, then towards
the right to secure the battery pack.
Installing a Second Battery Pack (Optional)
You can install a second battery pack to your computer for a longer operating time
when AC power is not available. To install a second battery pack:
when AC power is not available. To install a second battery pack:
1. Make sure that system power is off.
2. Open the media bay cover by sliding the release latch towards the left.
3. Press upwards the optical drive release latch () and carefully pull on the
ribbon strip () to remove the optical drive.