Getac Technology Corporation V110GD Manual De Usuario
© 2011 Microchip Technology Inc.
Preliminary
DS61168C-page 153
PIC32MX1XX/2XX
bit 3
Unimplemented:
Read as ‘0’
bit 2
TSYNC:
Timer External Clock Input Synchronization Selection bit
When TCS = 1:
1
1
= External clock input is synchronized
0
= External clock input is not synchronized
When TCS = 0:
This bit is ignored.
This bit is ignored.
bit 1
TCS:
Timer Clock Source Select bit
1
= External clock from TxCKI pin
0
= Internal peripheral clock
bit 0
Unimplemented:
Read as ‘0’
REGISTER 12-1:
T1CON: TYPE A TIMER CONTROL REGISTER (CONTINUED)
Note 1:
When using 1:1 PBCmLK divisor, the user’s software should not read/write the peripheral SFRs in the
SYSCLK cycle immediately following the instruction that clears the module’s ON bit.
SYSCLK cycle immediately following the instruction that clears the module’s ON bit.