General Dynamics Itronix Corporation XC6250RIM801D Manual De Usuario

146

X-C 6250 Pro User’s Manual

79-0003-003   22 October 1999

…I/O Ports

Floppy disk attached to the parallel port does not work after

suspend/resume
•

Not all external floppy disk drives will work with the mobile

computer. Make sure all add-on device drivers are Advanced Power

Management (APM) aware.

PC SRAM cards are not readable on the mobile computer
•

If the SRAM card is reformatted on the mobile computer, read/write

operations will be successful.

• Verify the following lines are in your CONFIG.SYS:

“DEVICE=C:\WINDOWS\SYSTEM\CSMAPPER.SYS”
“DEVICE=C:\WINDOWS\SYSTEM\CARDDRV.EXE\SLOT=2”

Serial ports do not work consistently with Procomm Plus Version

2.00 or earlier
•

Procomm Plus Versions 2.01 and later do support 16550 buffered

UART operation. Upgrade software.

The system does not automatically detect COM3
•

This error can occur if COM3 is removed using Device Manager in

System Properties and then “Add New Hardware” is run. To prevent

this problem, open a DOS box and enter MODEM ON before running

“Add New Hardware.”