General Dynamics Itronix Corporation XC6250RIM801D Manual De Usuario
159
Appendix B. Troubleshooting
79-0003-003 22 October 1999
Radio Modems
How can I tell if my ARDIS radio is working?
•
•
First connect the computer to external power, install a fully-charged
battery, and then follow the procedure below for your particular
operating system.
1 From the Start Menu, select Shut Down, and then choose Restart
1 From the Start Menu, select Shut Down, and then choose Restart
the computer.
2 Press
F8
when this message appears: Starting Windows 95...
3 Select Option 5.
This allows you to single step through each startup command.
4 Respond N to each prompt EXCEPT the following:
Process your startup device drivers (CONFIG.SYS)
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
DEVICE=C:\WINDOWS\HIMEM.SYS
DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
5 From the DOS prompt, enter C:\CD XCTOOLS.
6 Enter RFGXM.
6 Enter RFGXM.
Radio driver starts and the radio on/off light comes on; continue to
the next step. If the light does not come on, contact your
companys help desk for assistance.
7 Enter XCMG.
If a message appears indicating that it was unable to initialize,
contact your companys help desk for assistance.
8 ARDIS can be contacted to verify that the computer has an ARDIS
radio installed and that it is registered with their company.
Contact your companys help desk for assistance.
Contact your companys help desk for assistance.