FreeWave Technologies Inc. 1521131FFF Manual De Usuario

 Spread Spectrum Wireless Data Transceiver User Manual 

LUM0002AG Rev A 

Version 7.0 

12 

Note:  The terms Modem and Transceiver are used interchangeably in this manual and in the text of the 

Setup menu.  While the words have different meanings, the two terms should be treated as one 
and the same when referring to FreeWave products. 

Note:  Included on the User Manual CD is the optional “EZConfig” transceiver setup program and 

instructions.  This program eliminates the need to use HyperTerminal to program the 
transceivers.  For FGR2-series radios, EZConfig 3.4 or later will need to be used. 

Note:  The FGR2-series radios may also be programmed via the FreeWave Tools Suite software which 

is included on the User Manual CD.  This program replaces EZConfig as the configuration 
software. 

Once the transceiver is powered and connected with the programming cable to the programming 
computer, it can be programmed for use through HyperTerminal or EZConfig. 

The following describes how to set HyperTerminal to program the transceivers. 

Note:  The following screen shots are taken from a computer using Windows XP. The display may vary 

slightly if using different operating systems. 

Click on the Start button. A cascading menu appears. Select Programs, Accessories, 
Communications and then HyperTerminal. A window appears similar to the following: