FreeWave Technologies Inc. AMM0300AT Manual De Usuario
LIM0001AA Rev B (DRAFT)
Chapter 2: Hardware and Pinouts
This chapter provides information about the following:
l
Connectors and cable recommendations.
l
Connector pin details.
l
Antenna selection, location, and installation considerations.
l
Specifications for each embedded radio model, including operating temperature thresholds and
voltage requirements.
voltage requirements.
l
Mechanical drawings of each embedded radio model.
Embedded Radio Connector Pinouts
Each embedded transceiver model has a 10 or 14 pin connector. The following sections provide information
about the function of each pin in the connector, and what to do if you do not use the pin.
about the function of each pin in the connector, and what to do if you do not use the pin.
10-Pin Connector
The following pin information applies to the straight 10-pin connector on the MM2-MR-T and MM2-MR-R
models:
models:
Pin
Input/
Output
Description
Label
If Not Used
1
Input
Power
B+
2
Input
Reset
Interrupt
Pull High
3
Input
Data Terminal Ready
DTR
Pull to Ground
4
Ground
Ground
GND
3
Draft