FreeWave Technologies Inc. PRW1001ER Manual De Usuario

WavePoint 10e

4. Do one of the following:

Edit an existing binding rule - Right-click the address in the table and select

Edit.

Add an IP-MAC binding rule - Click Add New IP-MAC Binding below the

table.

5. In the Name field, enter a unique name.

Note: The name is shown in drop-down lists and other areas of the

Configuration pages that reference bindings

6. In the MAC Address field, enter the physical hardware address for the device associated

with this binding rule.

7. In the IP address field, enter the IP address for the device associated with this binding

rule.

8. Set the Log Dropped Packets option to On to enable logging packets before they are

dropped.

9. Set the Associate with DHCP Reserved IP option to On to add the IP address to the

Reserved IP address list for the DHCP server.

10. Click Save to save the changes or Cancel to clear any changes without saving.

Data Routing

Note: Data routing applies to networks with more than two devices.

Data can be defined how it is routed between the LAN and WAN in the network using:

static (fixed) routes.

the Routing Information Protocol (RIP) which defines a dynamic route based on the

number of hops to get to a network location.

Defining Static Routing Rules

A static route is a fixed path defined on a router that is added to the routing table. When there is a

change in the network or a failure occurs between two network devices with static routing rules, data

does not reroute through a different path.

Note: Static routes are typically used in small networks or for lower bandwidth WAN

links.

If the network is large, Static Routing is likely not optimal because each route and

any redundant path information has to be added to each device in the network

LUM0063AA Rev 05/05/2014

Page 55 of 171

This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by

FreeWave®. This document cannot be reproduced in whole or in part by any means without written permission from

FreeWave Technologies, Inc.