FreeWave Technologies Inc. PRW5000AB Manual De Usuario
WavePro™ WP201 Access Point: User Manual
8.2. Mesh-AP Mode
Under the AP Mesh mode, the WP201-100 can be:
l
Used as the central connection hub for station or clients that support IEEE 802.11:
l
b/g/n in a 2.4GHz network.
l
ac/n in a 5GHz network.
l
Configured with the same Mesh SSID and security password in order to associate with
other WP201-100s.
other WP201-100s.
l
Connect with clients under the same SSID and encryption signatures.
Example: Use one band to connect the WP201-100 Access Points in range with the Mesh mode and
the other band to broadcast traffic on the network.
If meshing on 2.4GHz and to provide general clients access, Mesh-AP is appropriate as there are
still clients that only support 2.4GHz.
the other band to broadcast traffic on the network.
If meshing on 2.4GHz and to provide general clients access, Mesh-AP is appropriate as there are
still clients that only support 2.4GHz.
Note: Use Mesh-AP to allow clients to join on the same band as the MESH backbone.
Example
Note: Use the
procedure to setup a WP201-100
Mesh AP network.
Figure 161: AP Mesh Mode
LUM0073AA Rev Feb-2017
Page 135 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT