FreeWave Technologies Inc. PRW5000AB Manual De Usuario
WavePro™ WP201 Access Point: User Manual
9.3.2. Telnet, SSH and HTTPS Setting areas
Figure 170: Advanced window - Telnet, SSH, HTTPS Setting areas
Advanced window - Telnet, SSH and HTTPS Setting areas
Control Area
Control Title
Control Description
Telnet area
Status Enable
or Disable
option buttons
or Disable
option buttons
Select the Enable option button to activate the Telnet feature in
the WP201-100.
the WP201-100.
Important!
: When using Telnet , the changes made in
the CLI MUST be saved using the
save
command and
the WP201-100 MUST reboot to allow the configuration
changes to be applied.
changes to be applied.
Use the Telnet to type commands instead of
choosing them from a menu or selecting an icon to
perform an action.
choosing them from a menu or selecting an icon to
perform an action.
SSH area
Status Enable
or Disable
option buttons
or Disable
option buttons
Select the Enable option button to activate the Secure Shell
(SSH) feature in the WP201-100.
(SSH) feature in the WP201-100.
l
Use the SSH feature to make secure, encrypted
connections in the WP201-100 network.
connections in the WP201-100 network.
l
The Secure Shell is a network protocol that allows data to be
exchanged using a secure channel between two network
devices.
exchanged using a secure channel between two network
devices.
Note: This selection determines access to the WP201-
100 using either Telnet or Secure Shell.
100 using either Telnet or Secure Shell.
LUM0073AA Rev Feb-2017
Page 148 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT