FreeWave Technologies Inc. PRW5000AB Manual De Usuario
WavePro™ WP201 Access Point: User Manual
12.2. Version 2.0.8.0
Release Date: June, 2016
Download Procedure
Download the WP201-100 User Manual from
for the upgrade
procedure.
Additions and Changes
l
Corrected a link throughput issue for RF links longer than one mile or 1.6km.
Known Limitations and Workarounds
l
MESH Networking supports either 2.4 GHz or 5 GHz at a time.
l
When upgrading to new firmware, clean the browser cache.
l
OGM rate is still 54Mbps.
l
After resetting to default, the default value will be changed for TQ assist and Link timeout.
l
If the cache of browser is not cleaned, the word “Green” will show.
12.3. Version 2.0.7.8
Release Date: March, 2016
Download Procedure
Download the WP201-100 User Manual from
for the upgrade
procedure.
Additions and Changes
l
DFS is enabled for applicable U-NII bands.
l
U-NII Band1 disabled for Canada. (IC outdoor does not include U-NII Band 1)
l
Transmit Power set to “auto” and “greyed out” when “auto channel” is selected.
l
Transmit Power Range selection list is dynamic, it depends on different channel band and
antenna gain.
antenna gain.
l
Fixed NTP memory issue – fixed memory leak attributed to BusyBox crontab schedule.
Known Limitations and Workarounds
l
MESH Networking supports either 2.4 GHz or 5 GHz at a time.
l
When upgrading to new firmware, clean the browser cache.
l
OGM rate is still 54Mbps.
l
After resetting to default, the default value will be changed for TQ assist and Link timeout.
l
If the cache of browser is not cleaned, the word “Green” will show.
LUM0073AA Rev Feb-2017
Page 252 of 267
This document is the property of FreeWave Technologies, Inc. and contains proprietary information owned by
FreeWave. This document cannot be reproduced in whole or in part by any means without written permission from
FreeWave Technologies, Inc.
DRAFT