Continental Automotive GmbH 5WK47899 Manual De Usuario
Siemens VDO Automotive AG
SV I IC PE RF Design
IC:267T-5WK47899
FCC ID:KR55WK47899
Page 2 of 5
File:K:\POSTZULA\z1_Projekte\B_Abgeschlossen\Abgeschlossene_Projekte_(2005_2007)\FORD\CW170neu\technische_doku_doc\v2_315MHz\Func_CW
170_5WK47899_v2.doc
170_5WK47899_v2.doc
1.
SYSTEM OVERVIEW
The transmitter key consists of the fork (fork-shaped plastic component
with a steel shank and the slide-in module with a hole for the key ring, and
three buttons). The shank location is described below as "front", and the
side of the slide-in module which contains the buttons, is described as
"top". The key ring hole is thus located on the back on the left.
General functions of the buttons
Whenever a button is actuated, a telegram is emitted containing the
information as to which button has been actuated. Two successive button
actuations are only recognized if they are effected with an interval of at
least 65 ms. However, each button actuation gives rise to at least four
successive telegrams, even if another button is being actuated while they
are emitted. If the button is not released, max. 50 identical telegrams are
emitted. If the button is released after more than 4 telegrams have been
emitted, the telegram being generated is emitted, then the function is
aborted. Each new button actuation results in a new computation of the
alternate code, and in a new telegram sequence being sent. The control
unit receives the various telegrams generated by button actuation, and is
capable of distinguishing, via the alternate code, between continued
actuation and several separate, successive actuations of the button.
Designation and functions of the buttons
Button position
Button
number
Name
Effect
Front
1
Unlock
Unlocking the vehicle
Center
2
Lock
Locking the vehicle
Rear
3
Trunk Release Unlocking the trunk