Capital Prospect Ltd AM001 Manual De Usuario

 
You must first determine where the control panel will be located.  Please follow the criteria 
below to select the ideal location for the control panel. 
 

-  Place it within few feet of an electrical outlet and phone jack  
-  Place it where it is easily accessible by you and other users 
-  Place it away from any doors or windows which could be accessed by non-intended 

users 

-  Place it away from extreme temperature sources such as oven, stove and away from 

large metal objects which could affect the wireless performance 

 
After you have selected a location for the control panel, you are now ready to connect all the 
necessary wires and ready to power up the unit.  
 
1.  Connect the phone line from the telephone jack to the back of the control panel where it 

marks “Line”. 

 
2.  If you have another telephone that will be using the same telephone jack, you may connect 

this telephone to the control panel by plugging in the phone cord to the “Phone” outlet on the 
control panel. 

  
3.  Remove the battery cover on the bottom of the control panel with a Phillips screwdriver, and 

insert 4 AAA alkaline batteries into the batteries holder.  All the LED will flash once, and you 
will hear 3 beeps.  PWR LED will be on indicating the control panel is powered properly. 

 
4.  Plug in the AC adapter to the nearby electrical outlet and plug the other end to the socket on 

back of the control panel.  

 
 
5.  Rotate the antenna to the upright position to ensure the best signal reception.