Cisco Systems 102053 Manual De Usuario
C I S C O C O N F I D E N T I A L - D r a f t 2
1-4
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-03
Chapter 1 Overview
Hardware Features
Console Port
The console port provides access to the access point’s command-line interface (CLI) using a terminal
emulator program. Use an RJ-45 to DB-9 serial cable to connect your computer’s COM port to the access
point’s serial console port. (Refer to
emulator program. Use an RJ-45 to DB-9 serial cable to connect your computer’s COM port to the access
point’s serial console port. (Refer to
for a description of the
console port pinouts.) Assign the following port settings to a terminal emulator to open the management
system pages: 9600 baud, 8 data bits, No parity, 1 stop bit and no flow control.
system pages: 9600 baud, 8 data bits, No parity, 1 stop bit and no flow control.
Power Sources
The access point can receive power from an external power module or through inline power using the
Ethernet cable. Using inline power, you do not need to run a power cord to the access point. The access
point supports the following power sources:
Ethernet cable. Using inline power, you do not need to run a power cord to the access point. The access
point supports the following power sources:
•
Power supply (input 100–240 VAC, 50–60 Hz, output 48 VDC, 0.2A minimum)
•
Inline power from:
–
Cisco Aironet Power Injector for 1100 and 1200 series access points
–
A switch capable of providing inline power, such as Cisco Catalyst 3500XL, 3550, 4500, or
6500 switches
6500 switches
–
An inline power patch panel, such as the Cisco Catalyst Inline Power Patch Panel
Note
The Catalyst 3550-24 PWR switch supports power for access points configured with both 2.4-GHz and
5-GHz radios. Other switches and patch panels might not provide enough power for both radios.
5-GHz radios. Other switches and patch panels might not provide enough power for both radios.
UL 2043 Certification
The access point is encased in a durable metal case having adequate fire resistance and low
smoke-producing characteristics suitable for operation in a building's environmental air space, such as
above suspended ceilings, in accordance with Section 300-22(c) of the NEC, and with Sections 2-128,
12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
smoke-producing characteristics suitable for operation in a building's environmental air space, such as
above suspended ceilings, in accordance with Section 300-22(c) of the NEC, and with Sections 2-128,
12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.
Caution
Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a
building’s environmental air space, all other power injectors and power modules are not tested to UL 2043
and should not be placed in a building’s environmental air space, such as above suspended ceilings.
building’s environmental air space, all other power injectors and power modules are not tested to UL 2043
and should not be placed in a building’s environmental air space, such as above suspended ceilings.
Anti-Theft Features
There are two methods of securing the access point to help prevent theft:
•
Security cable keyhole—You can use the security cable slot to secure the access point using a
standard security cable, such as those used on laptop computers.
standard security cable, such as those used on laptop computers.
•
Security hasp—When you mount the access point on a wall or ceiling using the mounting bracket
and the security hasp, you can lock the access point to the bracket with a padlock. Compatible
padlocks are Master Lock models 120T and 121T or equivalent.
and the security hasp, you can lock the access point to the bracket with a padlock. Compatible
padlocks are Master Lock models 120T and 121T or equivalent.