Microsoft Corporation RM-56 Manual De Usuario
G e t s t a r t e d
16
1. Connect the charger to a
wall socket.
2. Connect the lead from the
charger to the CA-44
charging adapter (1), and
the adapter to the socket on
the bottom of your phone
(2).
charging adapter (1), and
the adapter to the socket on
the bottom of your phone
(2).
If the battery is completely
discharged, it may take a few minutes before the charging indicator
appears on the display or before any calls can be made.
discharged, it may take a few minutes before the charging indicator
appears on the display or before any calls can be made.
The charging time depends on the charger used. For example, charging a
BL-5C battery with the AC-4 charger takes about 1 hour and
30 minutes while the phone is in the standby mode.
BL-5C battery with the AC-4 charger takes about 1 hour and
30 minutes while the phone is in the standby mode.
■ Switch the phone on and off
Warning: Do not switch the phone on when wireless phone use is
prohibited or when it may cause interference or danger.
prohibited or when it may cause interference or danger.
Press and hold the power key as shown.
If the phone asks for a PIN or UPIN code, enter the code,
and select
and select
OK
.
Plug and play service
When you switch on your phone for the first time, and
the phone is in the standby mode, you may be asked to
get the configuration settings from your service
provider (network service). Confirm or decline the
query. See
the phone is in the standby mode, you may be asked to
get the configuration settings from your service
provider (network service). Confirm or decline the
query. See
Connect to serv. support
in “Configuration,”
p. 70 and “Configuration settings service,” p. 10.