Attenti TRXS-840-2 Manual De Usuario
3
2
2
2
2
Installing the Transmitter
Installing the Transmitter
Installing the Transmitter
Installing the Transmitter
Once the E3 Receiver Unit has been connected and is working
correctly, you can calibrate and install the Transmitter (Tx).
Check that you have the following equipment items before you
install the Transmitter:
correctly, you can calibrate and install the Transmitter (Tx).
Check that you have the following equipment items before you
install the Transmitter:
Transmitter (Tx) and Strap holder
Locking clips (male and female)
Strap holder
Electronic key
Locking tool
Screwdriver (to open the clips if necessary). It is
recommended to use a 5mm flat head screwdriver
recommended to use a 5mm flat head screwdriver
Activating the
Activating the
Activating the
Activating the Transmitter
Transmitter
Transmitter
Transmitter
Before the Transmitter can be attached to the Offender, you
must first activate and calibrate the Transmitter.
must first activate and calibrate the Transmitter.
To activate and calibrate the Transmitter:
1. Hold the Transmitter in your hand with the metal pins (along
the strap) pointing towards you. You will need to support the
underside of the strap.
underside of the strap.
2. Hold the electronic key in your other hand, with the ‘OFF’
button pointing towards the open or free end of the strap.
The ‘OFF’ button must be facing away from the Transmitter
body.
The ‘OFF’ button must be facing away from the Transmitter
body.
3. Press the electronic key down over the metal pins with the
two touch points on top of the electronic key matching the
metal pins on the Transmitter strap.
metal pins on the Transmitter strap.