RF Ideas Inc LC80XW6 Manual De Usuario
©2015 RF IDeas
Configuration Utility User Manual
P a g e
|
46
Image 58: Beeper
The number value input area to the right of the Long Beep(s) box is designated for the number of
beeps to produce when the device is in use.
beeps to produce when the device is in use.
OEM Converter Board
Functions
Descriptions
Beeper On
(Output Active Low)
Check this to turn the device beeper on.
Relay On
Check this to turn on relay output on converter board.
Image 59: OEM Converter Board
Card ID
Functions
Descriptions
GETID
Click while scanning a card over the device. The ID displays under the button. This
returns 64 bits maximum.
GETID(32)
Click while scanning a card over the device. The ID displays under the button. This
returns 255 bits maximum.
GetQueuedID
Click to display the last card data read. This returns 255 bits maximum.
Clear Lockout
Check to clear the time remaining to allow the device to read the next card immediately.
Clear UID
If clear UID is set, the card and the overrun counters will be cleared for the next read. If
clear Hold is set, the reader will be ready to read another card.
GETID Data Display