Blue Tower Communications Ltd TRANSPONDITV4 Manual De Usuario

 

 

6.  Monitor the TransPondIT signal for correct utility code, identification number, and meter reading: 

• 

If the TransPondIT signal is OK, then check the TransPondIT ID # and utility code in the 

hand held configuration file. 

• 

If the TransPondIT signal is not present, place the TransPondIT in the ConFigIT (Refer to 

the  ConFigIT Installation and Operating Instructions) and “Read” the TransPondIT 

configuration parameters.  (Ensure the transmitter is enabled and the correct utility code, 

TransPondIT ID #, and meter information has been set.) 

7.  If the TransPondIT cannot be read by the ConFigIT, replace it with a known good unit and retest. 

8.  Reconnect the Handheld computer and retest. 

 

 

Note: If the above procedure cannot be completed, or there are any questions, please contact the 

RAMAR Technical Support group for assistance.