Gemtek Technology Co. Ltd. AP931229AG1 Manual De Usuario

Gemtek Systems 

 

Page 28 of 60 

 

 

 

Name – specify the new RADIUS server name which is used for selecting RADIUS server.  

Server IP – authentication RADIUS server IP address [dots and digits]. 

Server Port – specify the network port used to communicate with RADIUS [1-65535]. 

 

The port default value of 1812 is based on RFC 2138 "Remote Authentication Dial-
in User Service (RADIUS)". 

Secret – shared secret string that is used to make sure the integrity of data frames used for 
authentication server. 

Save – add new specified RADIUS server. 

Cancel – restore all previous values. 

After adding a new RADIUS server or editing an existing one, the following control appears: 

 

 

Edit – edit an existing RADIUS server settings 

Delete – delete an existing RADIUS server settings 

Reboot – restart the controller to make applied changes work. 

 

If there is no other setting needed to be modified, click the Reboot button for 
applying all modifications.  
And if there are still other setting modifications needed, go ahead to finish all 
changes and then click Reboot button to restart and apply all settings together.  

 

Network | DHCP Settings 

P-780 can act as DHCP server or DHCP relay. The DHCP (Dynamic Host Configuration Protocol) 
service is supported on physical interfaces.