Gemtek Technology Co. Ltd. M970626G Manual De Usuario

Please follow the instruction to install your 11B/G mini PCI 

module on your system (for example, your notebook): 

 

 

 

Your computer comes with a unique Mini PCI Card socket, 

which allows the computer to add wireless LAN (IEEE802.11g). 

 

Step 1  Insert the mini-PCI at an angle of approximately 45 

degrees into the empty Mini-PCI interface socket. 

Step 2    Press it firmly so that the contact edge is driven into the 

receiving socket. 

Step 3    Connect the internal antenna. 

Step 4    Connect the External antenna. 

 

Congratulations! You have just completed the Wireless LAN 

hardware installation. When you boot up the computer, you 

should expect to see the wireless LAN connection capacity. 

 

  IMPORTANT NOTE: To comply with FCC RF exposure 

compliance requirements, the antenna used for this transmitter 

must be installed to provide a separation distance of at least 20 

cm from all persons and must not be co-located or operating in 

conjunction with any other antenna or transmitter. 

 

 

 

Go to [Start > Settings > Control Panel > System > Hardware > 

Device Manager]. Double-click on Network Adapters and check 

if 11B/G mini PCI module appears as one of the adapters. If it 

does not exist, Windows has not detected it or the device driver 

has not been installed properly. If there is a yellow mark or 

red-cross on the network adapter, it may be a device or 

resource conflict. Replace or update the device driver or consult 

Windows.