Brooks Automation Inc. LF60C Manual De Usuario
Product Manual - RFID Reader LF60C SoliD
34
C h a p t e r 6
I n s t a l l a t i o n
6.7
Power/RS485 bus connection
LF60C
Software version SG2S12/SG2IV1.2 does not support communication over
RS485.
RS485.
The device can be connected to an interior DC power circuit of the equipment or
to a DC adapter.
to a DC adapter.
Once the device is connected to the power supply, the power LED lights up.
If the LED does not light up, please refer to chapter
If the LED does not light up, please refer to chapter
LF60CM
3-pin connecting plug
DANGER
Risk of death due to dangerous voltage
Risks exist when supplying the device with the incorrect voltage.
Only use cables, plugs and adapters supplied by the manufacturer.
Observe power ratings of the technical data (
Pin
Signal
1
Not used
2
RS485 B
3
Signal ground
4
Not used
5
Power ground
6
Signal ground
7
RS485 A
8
Not used
9
+24 V DC