Brooks Automation Inc. LF60C Manual De Usuario
Product Manual - RFID Reader LF60C SoliD
38
C h a p t e r 6
I n s t a l l a t i o n
LF60CM
5-pin connecting plug
6.12 DIP switches
The activation of a DIP switch depends on the value of parameter 36.
Switch #
"Test mode" function
1
Deactivation of automatic protocol recognition from version
SG2S12
SG2S12
"OFF" - automatic protocol recognition active
"ON" - automatic protocol recognition deactivated
The protocol setting depends on the DIP2 switch setting.
2
Protocol selection (only if DIP1 is set to "ON") from version
SG2S1
SG2S1
"OFF" - ASCII protocol
"ON" - SECS/HSMS protocol
3 - 5
No function
6
Switches between reading and writing action in test mode.
"OFF" only reading a tag
"ON" reading and writing a tag
7
Switches the reader into test mode.
In test mode, the reader reads or writes (depends on the
setting of switch 6) permanently to the tag, and shows the
result via LED 'Read/Write ok' and 'Read/Write fail'.
setting of switch 6) permanently to the tag, and shows the
result via LED 'Read/Write ok' and 'Read/Write fail'.
"ON" test mode activation
8
Launch automatic antenna tuning on switching from "OFF" to
"ON".
"ON".