Cross Point b.v. CP301MAXRXA Manual De Usuario
Technical Manual AM Systems
Cross Point Device Explorer
v4.4
Page 41 of 72
8.3
Store overview
When the Device Explorer is started and you have successfully logged-on, the Store
overview screen opens.
overview screen opens.
All Access Points that are available for you are shown in this screen.
Figure 25: Store overview
Select the required store from the Store overview screen through a double click on the
store to be able to perform local or remote service to the AM systems that are installed in
the selected store.
store to be able to perform local or remote service to the AM systems that are installed in
the selected store.
The next chapters will cover the specific transceiver and receiver properties and settings.
Please refer to the Cross Point Device Explorer User Manual for more information on how
to change settings for the Access Point itself.
to change settings for the Access Point itself.
8.4
Dashboard
After a successful logon to the selected Access Point, the Dashboard for this Access
Point appears.
Point appears.
In case there are no devices connected yet to the Access Point, the Dashboard will show
the “No devices found” message. See Figure 26.
the “No devices found” message. See Figure 26.
If there are any devices connected to the Access Point, but no entrances have been
created yet, the Dashboard will show the details as displayed in Figure 27.
created yet, the Dashboard will show the details as displayed in Figure 27.
In case devices are connected and entrances have been created, the Dashboard will
display details similar to those in Figure 28.
display details similar to those in Figure 28.