Guillemot 5061156 Manual De Usuario
HWNAP-300 Hercules Wireless N Access Point
1. YOUR HERCULES WIRELESS N ACCESS POINT
With your Hercules Wireless N Access Point, move up to superior transfer speeds and live a new high-speed
wireless communications experience with an extended coverage zone.
wireless communications experience with an extended coverage zone.
Hercules Wireless N Access Point extends the signal from your WiFi equipment or very easily adds the WiFi
function to your modem-router. It takes interactivity with users even further by letting you share your Internet
access to watch high-definition videos or transfer large files without any hassles. It also allows you to share
your devices and data between multiple computers, while at the same time freeing you from the need for
kilometers worth of cables.
function to your modem-router. It takes interactivity with users even further by letting you share your Internet
access to watch high-definition videos or transfer large files without any hassles. It also allows you to share
your devices and data between multiple computers, while at the same time freeing you from the need for
kilometers worth of cables.
Great care has been taken in designing your product. Both simple to operate and user-friendly, it is well
suited to beginners and advanced users alike.
suited to beginners and advanced users alike.
And now, it’s time to learn about your new product and join in the Wireless Attitude
TM
!
1.1. Recommendations
- Never open up your Hercules Wireless N Access Point, as you risk damaging its internal components.
- In order to avoid the risk of fire or electrical discharge, keep your access point away from:
- rain or humidity, as well as all fluids (water, chemical products and any other liquids),
- sources of heat such as heaters, stoves and any other heat-producing devices (including amplifiers),
- direct sunlight.
- Do not cover your access point.
- Unplug the access point’s power cable if you do not plan on using it again for an extended period of time. To
unplug the power cable, take hold of and pull on the plug. Never pull on the cable itself.
unplug the power cable, take hold of and pull on the plug. Never pull on the cable itself.
- Disconnect the access point before cleaning. Use a soft cloth for cleaning and avoid using aerosol cleaners.
1.2. Specifications
Wireless access point compatible with the following WiFi protocols:
-
802.11b: 1, 2, 5.5 and 11Mbits/s data rates in the 2.4GHz band
-
802.11g: 6, 9, 12, 18, 24, 36, 48 and 54Mbits/s data rates in the 2.4GHz band
-
802.11n draft 1.0 and 2.0: data rates in the 2.4GHz band, varying depending on the bandwidth of
the channel used (20 or 40MHz). Values are classified from MCS0 to MCS15 and vary from 7.2
to 144.44Mbits/s for 20MHz and from 15 to 300Mbits/s for 40MHz
to 144.44Mbits/s for 20MHz and from 15 to 300Mbits/s for 40MHz
DSSS
/
CCK
frequency range and
OFDM
modulation from 2.412GHz to 2.484GHz (13 channels)
Compatible with the following security protocols:
-
WEP
with 64 and 128-bit key length
-
WPA-PSK
with TKIP or AES encryption (802.11i security protocol)
-
WPA2
with TKIP and AES encryption (802.11i security protocol)
Filtering by
MAC address
WMM
mode support (Wi-Fi MultiMedia™)
WPS
(Wi-Fi Protected Setup
TM
)
LAN mode support
802.11n
wireless
access point
RF specification: frequency band = 2.4GHz – 2.484GHz
User Manual – 3/94