Bendix Commercial Vehicle Systems LLC TX433TS-2 Manual De Usuario
SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/13/2000 Page 15 of 55
This manual is under review by SmarTire – DO NOT ISSUE
Pressure Alert Systems – 2 and 4 wheels – Multi-fit Valve Mount Transmitters
Kit # 060.2004 (4 wheel) Product B
Kit # 060.2002 (2 wheel) Product I
Kit # 060.2004 (4 wheel) Product B
Kit # 060.2002 (2 wheel) Product I
Overview
These kits contain a base receiver, two or four valve mounted transmitters, installation hardware
and documentation for use on tires with a pressure up to 83 PSI (gauge).
The transmitters transmit pressure and temperature data when the vehicle attains a speed of 10
kph. Tire pressure and temperature are checked every six seconds and data is transmitted every 5
minutes.
The receiver annunciates a pressure loss incident at two severity levels. The initial warning
occurs when the pressure has dropped a set amount below the required pressure. A second
warning occurs when the pressure has dropped to a level considered critical to the support of the
vehicle. The affected tire is identified with a colour coded indicator on the receiver,
corresponding to the same colour code on the valve of the respective tire.
An optional serial port can send transmitter data to another customer device.
To install the system attach a transmitter to a suitable valve and mount in the valve hole. Plug the
receiver into the cigarette lighter plug with the supplied cable.
Note: Valves are not included with the kit.
and documentation for use on tires with a pressure up to 83 PSI (gauge).
The transmitters transmit pressure and temperature data when the vehicle attains a speed of 10
kph. Tire pressure and temperature are checked every six seconds and data is transmitted every 5
minutes.
The receiver annunciates a pressure loss incident at two severity levels. The initial warning
occurs when the pressure has dropped a set amount below the required pressure. A second
warning occurs when the pressure has dropped to a level considered critical to the support of the
vehicle. The affected tire is identified with a colour coded indicator on the receiver,
corresponding to the same colour code on the valve of the respective tire.
An optional serial port can send transmitter data to another customer device.
To install the system attach a transmitter to a suitable valve and mount in the valve hole. Plug the
receiver into the cigarette lighter plug with the supplied cable.
Note: Valves are not included with the kit.