Bendix Commercial Vehicle Systems LLC TX433TS-2 Manual De Usuario
SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/13/2000 Page 38 of 55
This manual is under review by SmarTire – DO NOT ISSUE
Hidden Programming Mode – Level 3
Low Pressure Alert
This mode sets the Low Pressure Alert and is used only by the
receiver.
Hold the SET button for 10 seconds. The screen will show the
diagnostic menu after 5 seconds. Another 5 seconds later, the
warning icon and the pressure unit are displayed
Use the TIRE button to scroll to the desired axle. The tires of
the selected axle are filled in.
Press the MODE button to display the current value of the
selected axle. Press the TIRE or MODE button to increase or
decrease the value respectively. The lowest value is
determined by the setting of the Low Pressure Warning. The
highest is 92 PSI.
the selected axle are filled in.
Press the MODE button to display the current value of the
selected axle. Press the TIRE or MODE button to increase or
decrease the value respectively. The lowest value is
determined by the setting of the Low Pressure Warning. The
highest is 92 PSI.
When the desired value is set, press the SET button to save
and return to the axle selection menu.
Scroll to a different axle using the TIRE button or press the
SET button to exit this mode.
and return to the axle selection menu.
Scroll to a different axle using the TIRE button or press the
SET button to exit this mode.