Bendix Commercial Vehicle Systems LLC TX433VM Manual De Usuario
SmarTire Systems Inc.
Tire Monitoring System Reference Manual
6/20/2000 Page 53 of 56
This manual is under review by SmarTire – DO NOT ISSUE
Service and Warranty
Replacing a Transmitter – Valve and Strap Mount
1. Remove the existing transmitter
2. Install the new transmitter using the installation procedure in this manual.
3. Set the multi-function display into learn mode.
4. Spin the tire to provoke transmission.
5. Verify the system functions properly.
2. Install the new transmitter using the installation procedure in this manual.
3. Set the multi-function display into learn mode.
4. Spin the tire to provoke transmission.
5. Verify the system functions properly.
Replacing a Receiver
1. Unplug the existing receiver
2. Plug in a multi-function display and set into learn mode
3. Spin each tire in sequence to allow the new receiver to learn the ID codes of the
2. Plug in a multi-function display and set into learn mode
3. Spin each tire in sequence to allow the new receiver to learn the ID codes of the
transmitters.
4. Verify the system functions properly.
Replacing a Full Function Display
1. Remove power.
2. Unplug the existing display.
3. Plug in the new one in its place.
2. Unplug the existing display.
3. Plug in the new one in its place.
SmarTire Service Policy – Handling Returned Materials
To return any materials to SmarTire, call SmarTire Service at 1-800- to receive a Returned
Material Authorization number (RMA). Follow instructions given by the service department for
packaging and shipping the product back.
Note: Shipments by air required the use of SmarTire approved shielding material to prevent
radio transmissions in the aircraft.