Datamars SA GES3S Manual De Usuario

Descargar
Página de 39
 
GES3S Manual 
– v. 1.5  June 2013  
 
35 
9  Do you have any problem by identifying an animal? 
9.1 
The reading distance is too short 
 
The  maximum  reading  distance  is  obtained  with  the  transponder  (tag)  perpendicular  to  the 
antenna  and  aimed  at the  centre  of  the  antenna  coil.  If  the  tag  is  implanted  into  an  animal  its 
orientation may not be optimal and therefore the reading distance may be reduced. 
 
You  might  be  close  to  a  source  of  electromagnetic  disturbances  like  video  or  TV.  Move  a  few 
meters away and try again. 
 
Do not use the reader on a steel table. The metal will reduce the performance of the antenna. 
 
The reading distance is reduced if the transponder is still in the needle. 
9.2 
The reader does not read the transponder 
 
Change the angle of the reader and try again. 
 
Some  types  of  transponders  from  other  manufacturers  are  disturbed  if  placed  in  the  centre  of 
the reader-antenna. It is possible that some tags will not function if placed in parallel and at the 
centre of the antenna. Change the direction of the tag or of the antenna. 
9.3 
The reader does not work 
 
Charge  the  reader  for  at  least  30  minutes  and  try  again  (recommended  time  for  full  battery 
recharge = 2 hours). 
 
Check the ambient temperature: it has to be between -5ºC and +45º C. 
 
If you’re still having problems, please contact your dealer. 
 
The GES3S reader is a product developed and produced by DATAMARS, Switzerland. 
 
Should  you  have  any  suggestions  or  require  information  regarding  this  or  other  DATAMARS 
products, please contact your dealer.