Datamars SA GES3S Manual De Usuario
GES3S Manual
– v. 1.5 June 2013
6
2.2
Read a transponder
Place the GES3S near the animal, then press the ON button
To stop the reading mode press the ON button again. The following figure shows the result of a
successful read:
successful read:
1.
There are two types of transponder: FDX-B and HDX, which are the ISO standard
11784/5.
11784/5.
2.
The Alpha country code is according to ISO 3166, ISO 11784/5.
3.
The Identity Code number is according to ISO 11784/5.
4.
Crot
al ID Code. It’s usually the lasered number that’s on the tag. It’s useful when the
electronic identification code and the lasered number are different.
5.
EIC counter
. It’s incremented each time a new EIC is read. It’s reset whether by pressing
the ‘RESET’ button or by starting a new procedure.
The following figure shows the result of an unsuccessful read:
All the EID tags read with the GES3S are stored in session files by default to make sure that no
data is lost. A session file is created once a day and the saved information are composed as
follows:
[TAG/EID|DATE|TIME]
The session files are organized in the SD card file “session” and are organized by year and
month.
data is lost. A session file is created once a day and the saved information are composed as
follows:
[TAG/EID|DATE|TIME]
The session files are organized in the SD card file “session” and are organized by year and
month.
2. Country Code
1. Transponder type + Field bit info
4. Crotal ID Code
3. ID Code
CIC-7
#0002
RESET
5. EIC Counter