Cameo Communications Inc DSLR2001N Manual De Usuario
Advanced
TRENDnet
DSLR-2001N
53
Check a corresponding box to select the option.
To reset the ADSL settings, click the Reset button.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
button to discard your changes.
6.5
RIP Settings
A Routing Information Protocol (RIP) is an Internet protocol that
is used to share routing information table with other routing
devices on the local and wide area network.
is used to share routing information table with other routing
devices on the local and wide area network.
To access the RIP Settings page, click Advanced > RIP Settings.
To add RIP settings, do the following:
1.
Select the Interface.
2.
On the Receive Mode and Send Mode drop-down lists, select the
appropriate versions.
appropriate versions.
☞
NOTE: The selected versions should match the versions
supported by the other routers on your network.
supported by the other routers on your network.
3.
Click the Add button.
To delete an RIP setting, click the corresponding button.