Cameo Communications Inc DSLR2001N Manual De Usuario
Advanced
TRENDnet
DSLR-2001N
55
IP Address — Enter the local network IP address of the system
hosting the server.
hosting the server.
Time Schedule — Select a schedule when to use the virtual server
or click the New Time Schedule button to create a new schedule.
or click the New Time Schedule button to create a new schedule.
Click the Apply button to save your changes or click the Cancel
button to discard your changes.
button to discard your changes.
Port Trigger
This page displays the port trigger settings on your network. Port
triggering is a type of port forwarding where outgoing data from
specific ports are sent to specific incoming ports.
triggering is a type of port forwarding where outgoing data from
specific ports are sent to specific incoming ports.
To access the Port Trigger page, click Advanced > NAT > Port
Trigger or click the Port Trigger button.
Trigger or click the Port Trigger button.
The table displays the port triggers on your network. To edit an
entry, click the corresponding
icon. To delete an entry, click
the corresponding button.
To add port triggers, click the Add button. The Port Trigger
Config screen is displayed.
Config screen is displayed.
Port Trigger — Check this box to enable port triggering.
Rule Name — Enter a rule name.
Use Interface — Select a DSL interface from the drop-down list.
Trigger Port — Enter the port that will trigger the device to open
ports for incoming data.
ports for incoming data.
Trigger Port Protocol — Select the trigger port protocol from the
drop-down list.
drop-down list.
Public Port — Enter the public port to be opened.
Public Port Protocol — Select the public port protocol.
Time Schedule — Select a schedule to apply port triggering from
the drop-down list or click the New Time Schedule button to create
a new schedule.
the drop-down list or click the New Time Schedule button to create
a new schedule.