Brady Corporation IPSERIES Manual De Usuario
Printing Operation
25
Printing Operation
The printer is ready for operation when all connections are made and labels
and ribbon are loaded.
and ribbon are loaded.
Synchronizing the Paper Feed
After the label stock has been inserted, the printer will calibrate automatically
if Brady-brand materials are used. If materials other than Brady-brand are
used, calibration is performed manually.
if Brady-brand materials are used. If materials other than Brady-brand are
used, calibration is performed manually.
■
Press the feed key to start the synchronization.
■
Remove the blank labels produced during the synchronization.
A
CAUTION
Printhead damage caused by improper handling!
• Do not touch the bottom of the printhead with
fingers or sharp objects.
• Ensure that the labels are clean.
• Ensure that the label surfaces are smooth.
Rough labels act like emery paper and reduce
the service life of the printhead.
the service life of the printhead.
Print with the lowest possible printhead
temperature.
temperature.