OKI ML3390 01091308*01256402 Manual De Usuario
Los códigos de productos
01091308*01256402
Chapter 4: Printer menu settings
4-12
Auto CR
applies only to IBM
emulation.
CSF Bin Select
appears only
when an optional cut sheet
feeder with two trays is
installed.
feeder with two trays is
installed.
Operator Panel Functions:
Normally, all the buttons of the opera-
tor panel are active, but if you choose Limited Operation, the but-
tons PRINT QUALITY, CHARACTER PITCH and menu mode are
blocked. The corresponding functions can then only be controlled
by the software. This function is particularly suitable for printers
being used by one or more persons where the changing of settings
is undesirable. Hold down the MENU button when switching on to
call the menu in Limited Operation mode.
tons PRINT QUALITY, CHARACTER PITCH and menu mode are
blocked. The corresponding functions can then only be controlled
by the software. This function is particularly suitable for printers
being used by one or more persons where the changing of settings
is undesirable. Hold down the MENU button when switching on to
call the menu in Limited Operation mode.
Reset Inhibit:
Select Yes if you wish to suppress the initialisation
command sent by the software or system. This initialisation com-
mand resets all the functions to the values you have set in the menu.
mand resets all the functions to the values you have set in the menu.
Print Suppress Effective:
If the value Yes is selected in this menu
item, the commands for print suppression are active in all emula-
tions. If the value No is selected, the commands for print suppres-
sion are ignored.
tions. If the value No is selected, the commands for print suppres-
sion are ignored.
Auto LF:
After selecting Yes, the printer automatically adds a line
feed each time it receives a carriage return command. Check wheth-
er your computer also adds a line feed. If your print-outs always
have double-line spacing, you should select No. If lines are printed
on top of each other, Yes is the correct value.
er your computer also adds a line feed. If your print-outs always
have double-line spacing, you should select No. If lines are printed
on top of each other, Yes is the correct value.
Auto CR:
If you wish the printer to perform a carriage return auto-
matically each time it receives the line feed command, select Yes at
this position.
this position.
CSF Bin Select:
If you are using a cut sheet feeder with two bins,
you can use this menu item to select one of these two bins as the
standard bin and set different positions for the initial print line (top
of form) for both bins. After quitting the menu, you can change the
top of form position for the bin selected in the menu.
standard bin and set different positions for the initial print line (top
of form) for both bins. After quitting the menu, you can change the
top of form position for the bin selected in the menu.
SI Select Pitch (10 cpi):
You can define here whether the command
SI in IBM emulation selects a character pitch of 17.1 cpi or 20 cpi
when 10 cpi is used.
when 10 cpi is used.
SI Select Pitch (12 cpi):
You can define here whether the command
SI in IBM emulation selects a character pitch of 20 cpi or retains
12 cpi.
12 cpi.
Time Out Print:
If this function is activated and the printer receives
no data for 150 ms, the data in the printer buffer is printed out.
SI Select Pitch (10 cpi)
and
SI Select Pitch (12 cpi)
apply only to IBM emulation.
apply only to IBM emulation.