HP 626475-041 Manual De Usuario
Power Supply Output
Power Supply Output
Power Supply Output
Power Supply Output
(per power supply)
(per power supply)
Rated Steady-State Power 460 W (at 100 VAC),
460 W (at 200 VAC)
Maximum Peak Power
460 W (at 100 VAC),
460 W (at 200 VAC)
460 W (at 200 VAC)
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System may shut down if operating with a fan
fault or above 42°C °(107.6°F).
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System may shut down if operating with a fan
fault or above 42°C °(107.6°F).
Non-operating
-35° to 65°C (-31° to 149°F). Maximum rate of
change is 20°C/hr (36°F/hr).
change is 20°C/hr (36°F/hr).
Relative Humidity
Relative Humidity
Relative Humidity
Relative Humidity
(non-condensing)
(non-condensing)
Operating
10% to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, non-
condensing.
(82.4°F) maximum wet bulb temperature, non-
condensing.
Non-operating
10% to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non-
condensing.
(101.7°F) maximum wet bulb temperature, non-
condensing.
Altitude
Altitude
Altitude
Altitude
Operating
3048 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 609
m/min (2000 ft/min).
the type and number of options installed.
Maximum allowable altitude change rate is 609
m/min (2000 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 609 m/min (2000 ft/min).
altitude change rate is 609 m/min (2000 ft/min).
Acoustic Noise
Acoustic Noise
Acoustic Noise
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
L WAd
4.4 Bels
L pAm
27.1 dBA
Operating
L WAd
4.4 Bels
L pAm
27.2 dBA
NOTE:
NOTE:
NOTE:
NOTE: The listed sound levels above apply to standard SATA configurations.
Additional options may result in increased sound levels.
Additional options may result in increased sound levels.
Emissions Classification
Emissions Classification
Emissions Classification
Emissions Classification
(EMC)
(EMC)
(EMC)
(EMC)
(EMC)
FCC Rating
FCC Rating
FCC Rating
FCC Rating
Class B
Normative Standards
Normative Standards
Normative Standards
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
Pt 15; ICES-003; CNS13438; GB9254; EN
61000-3-2; EN 61000-3-3; EN 60950-1; IEC
60950-1
QuickSpecs
HP ProLiant ML110 Generation 7 (G7)
HP ProLiant ML110 Generation 7 (G7)
HP ProLiant ML110 Generation 7 (G7)
HP ProLiant ML110 Generation 7 (G7)
Technical Specifications
DA - 14012 North America — Version 15 — November 14, 2011
Page 38