Given Imaging Limited CAPDH-2 Manual De Usuario

Descargar
Página de 250
PillCam Capsule Endoscopy
60
Fitting Equipment on the Patient
Positioning PillCam Recorder DR2
1.
If you are using the recorder pouch, hang it from the patient’s shoulder while the patient is standing.
If you are using the recorder belt, secure it around the patient’s waist, while the patient is standing. 
2.
Make sure the locking handle at the back of the PillCam recorder is open. 
3.
Slide the two protrusions on the connector into the matching grooves in the PillCam recorder. 
4.
Verify that the connector is inserted completely, and then lock it by closing the handle on the PillCam 
recorder.
5.
Make sure that the PillCam recorder is on (the battery LEDs light up once every 5 seconds).
֠
֠
֠
֠
Note
The sensor array connector and wire should hang over the top of the 
recorder belt.
Locking handle 
is open before 
connecting 
sensor array
Protrusions on 
connector
Grooves in 
PillCam 
recorder
Closed handle